save 10% on orders of 2 or more knobs - code: save10

howitworks better


1. With the switch out, the knob behaves normally like any old knob, freely turning between Min & Max

<

2. When you find a setting you like &amp; want to revisit, push in the switch. The knob is still able to rotate all the way from min to max, but now you will feel it <strong>'Click'</strong> into place  at the setting it was on when the switch was pushed.
3.  If you want to remove the <strong>'Click'</strong> so the knob behaves normally again or if you want put the <strong>'Click'</strong> at a different setting, <em><span style="text-decoration: underline;">simply turn the knob back to the saved setting so it clicks into place</span></em><strong>,</strong> and then pull out the switch. Now the knob will go back to spinning normally &amp; you can save a new setting the next time you push in the switch.</div>
<p> </p>
If you pull out the switch <strong>without</strong> the knob being clicked into place at the saved setting, <em><span style="text-decoration: underline;">simply turn the knob all the way to min/max until you feel it <strong>'Click'</strong></span></em> - again the knob will now spin normally &amp; a new setting will be saved when the switch is pushed back in.